There's a lot more space inside the box with the dongle being drastically smaller this time around, and the jig being stored internally. Instead of a plain box, it now has clear branding to make it stand out and easier to find on my desk. Once again, my first impressions were really quite good. What's in the Box?Ī remarkably familiar package at first glance, the second iteration of the AceNS dongle comes in the same transparent box, with the same essentials to get you started. If you want to have a better understanding of the device's features and the dongle this is being compared to, be sure to check out my AceNS review. It is possible to view your screenshots and videos by pressing the (R) key before clicking on Album, this will launch the classic album application.A second RCM dongle from the Ace3DS team, this review mainly focuses on what's new and different. To use a homebrew, you must go through the Album application. Once in the home screen of your Switch, even if nothing seems to have changed visually, you are well on your CFW. You can remove the dongle and jig in the console.

The LED on the dongle should change color (Blue = Atmosphere | Green = ReiNX | Red = SX OS). Hold the keys until the console boots to the CFW (a handful of seconds). Now you have to press and hold the volume button (+) and press the power button. Plug the dongle into the console's USB port. Unplug the right joycon and install the jig instead. Be careful that it is not on standby mode. To do this, first of all, it must be turned off completely.

Now we are going to boot the Switch in RCM mode. When the copy is complete, eject the memory card correctly so as not to corrupt the data. Once your selection is made, download the zip and extract it at the root of your memory card. You can use this site which allows you to automatically download ready-made configurations, or you can customize them. Be careful, this will erase ALL DATA on the card!

Although not necessary, it is advisable to format the card in exFAT. If all goes well, it should be detected as a USB drive. Plug the memory card into your computer (Linux, Windows or Mac). The color tells you which CFW will be used: To choose the CFW to use, you must press the + button on the dongle for at least 3 seconds. A full charge lasts 1 hour and allows up to 1000 uses, which leaves a good autonomy in nomadic mode. To do this, simply plug it into a USB port on your PC or onto any standard USB charger. Before first use, the dongle must be recharged.

Rcm loader one amazon